Environmental And Power Usage - BrightSign 4K Series Hardware Manual

ENVIRONMENTAL AND POWER USAGE

BrightSign 4K players are designed to be used between 0°C and 40°C, at 90% maximum relative humidity, non-
condensing.
The power supply for 4K players is 60W and 12V at 5A. The device will use approximately 1A of power when playing a
3840x2160x60p H.265 (HEVC) source file.
Important: This product is intended to be supplied by power from a Listed Power Adapter, rated +12Vdc at 5A minimum.
An additional 4A of power is available for peripherals connected to a 4K player. The user should not connect any
combination of peripherals that will exceed 4A draw. If more than 4A is drawn, the external power supply may shut down
due to over-current conditions. The unit will not be damaged, but it may reboot or not operate properly until the overload is
removed.
If the device is being powered by the power supply, the 4A can be shared in any way among the following connectors:
Connector
Ethernet
USB 2.0/3.0
DE9 5V
DA15 3.3V
HDMI 5V
IR blaster output
If the device is being powered by PoE, only 1A is available for all connectors (or possibly less if the device is running a
resource-intensive presentation). It can be shared in any way among the following connectors:
All information provided in this reference manual applies to products under development. The characteristics and specifications of these products are subject to
change without notice. BrightSign assumes no obligation regarding future manufacturing unless otherwise agreed to in writing. © BrightSign LLC, 2014
Maximum Power Usage
Approx. 180mA (when transferring data)
500mA (on each connector)
500mA
500mA
500mA
300mA
BrightSign 4K242, 4K1042, 4K1142
16