Page 1
Viomi Alpha 2 Pro User Manual Please read this manual carefully before use and keep it properly. This product shall be operated only in location at altitude below 2,000 meters.
Safety Information 1. Instructions for use • To prevent the product from falling accidentally, do not use this Please pay a ention to the following basic safety precautions product in a suspended place without a protective fence, which before using the product: may result in personal injury.
Page 4
Safety Information • Prevent the suction of water, oil or other liquids, which may damage • This product can be used by children aged from 8 years and above the product. and persons with reduced physical, sensory or mental capabilities •...
Page 5
Safety Information 5. Scope of use of the product The product is suitable for the following floors: Wooden floor, Ceramic tile and Short-staple carpet. 6. Disclaimers Under any of the following circumstances, the product will be excluded from the scope of free warranty, but paid repair can be provided: A.
Packing list Robot vacuum-mop Automatic dirt disposal x 1 2-in-1 water tank x 1 Main brush x 1 Side brush x 1 HEPA filter x 1 Dust bag x 3 Handbook x 1 Mop holder x 1 Mop x 2 Disposable mop x 10 Cleaning tool x 1 Main brush...
Product Introduction Smart recharging Short press the bu on to start smart recharging. Long press for 5 seconds to enable pair mode Power on/off, Global cleaning Short press the bu on to start/pause cleaning Long press the bu on for 3 seconds to power on/off Network Configuration White glimmers: robot standby When the robot is power-on,...
Page 8
Product Introduction Robot Vacuum-mop and sensor Automatic dirt disposal (Two-in-one for dust collection and charging) Top cover Remove the top cover. Mount/remove dust bag. Dust bag holder IR lens Recharging/auto- matic dirt disposal Laser radar Universal caster Rolling brush probe. Surface cover Charging electrode Le caster...
Instructions on Installation Operation Instructions Install the automatic dirt disposal Switch on/off Long press power bu on for 3 seconds to switch robot on. (1) Place automatic dirt disposal on flat floor near wall, and connect the plug to a approved socket and switch power supply Power LED indicator flashes slowly and then lights on constantly in white color, and the robot in standby.
Page 10
Operation Instructions Network configuration and firmware update 2. Press the Dust Compartment release bu on to remove the 2-in-1 Dust Compartment with Water Tank. Download Mijia App, and use the mobile client to reset Wi-Fi according to the APP's tips. Refer to the Quick Guide for further information.
filter screen clamp of the 2-in-1 dust compartment with water tank have already. Or search "Viomi mall/Mijia" in the been installed. 5. Please close the top cover of the automatic dirt disposal before dirt disposal is app Store to download and install it.
1. Press Dust Compartment release bu on and pull the tank out to remove it. Download the App Search for "Viomi mall" or "Mijia" in app store; or scan the QR code to download and install the app. Bind Android-based cell phone to Wi-Fi Tap the available product, and tap "connect"...
Page 13
Maintenance 3. Remove the Filter screen. 5. Fill the Dust Compartment with water, shake it and then empty it. Repeat this process till it is clean. Filter screen clamp Filter screen 6. Turn the tank over and remove mop for cleaning or replace it. 4.
Page 14
Maintenance Cleaning main brush Clean/replace side brush 1. The main brush is consumable and shall be cleaned 1. The side brush is connected by buckles, and can be weekly. It is recommended to replace main brush every removed by hands easily. 6-12 months to ensure proper cleaning perfor- mance.Turn cleaner over, remove main brush cover and Remove...
Page 15
Maintenance Replace dust bag Clean sensor 1. When the dust bag is full, the orange LED indicator on dirt 1. It is recommended to weekly clean each sensor with clean disposal will lighting. Please change for a new one.". Please and so cloth to ensure proper cleaning performance.
Trouble Shooting Problem Solution Fault Prompt Solution Fails to start up Low ba ery. Please go to dirt disposal for recharging before use. Ambient Error #1. Make sure the Check for or remove any foreign temperature too low (lower than 0°C) or laser ranging sensor is ma er around laser radar, or relocate too high (higher than 50°C)
Page 18
Problem Solution Breakpoint resume. Make sure non-disturbance mode is not activated, which will disable proceeding at breakout point Proceeding at breakout point is unavailable when the machine is being charged. Robot fails to return to As the robot will re-generate a map a er charging dock a er fixed-point cleaning or being repositioned fixed point cleaning or...
Page 20
Manufactured by: Guangdong Lizi Technology Co., Ltd Address: Room 1-6, North of 1st Floor, Block A, Shengda Industrial Park, North No.2,Xinxi Four Road,Xiashi Village, Lunjiao Town,Shunde District,Foshan,Guangdong,China...
Need help?
Do you have a question about the Alpha 2 Pro and is the answer not in the manual?
Questions and answers