Electrical Connection - Kaiser KG Series Manual

20

ELECTRICAL CONNECTION

(Fig. 6) Prior to car
connection , please ensure that:
the plant characteristics are such as to
fo w what llo is
placed at the bottom of the working area
that the pla t is fitted with an efficient earth n
connection, following the standards and
law provisions
connection is compulsory in terms of the
law.
Should there be no cable and / or plug on the
equipment, use suitable absorption material for the
working temperature as well,
matrix plate. Under no circumstan
cable reach a temperature above 50°C of the
ambient tempera ture.
Should a direct connection to the network be
required, it will be necessary to interpose an
omnipolar switch with minimum aperture between
the 3 mm. contacts, dimensioned to bear the plate
load and it must follow the standards in force (the
yellow /green ea h rt cable must ot be interrupted
by the switch). The plug or omnipol
be easily reached on the insta
manufacturers decline any responsibility in the
event of non-compliance with what is described
above and the accident prevention norms not
being respected and followed.
GB
rying out the electrical
indicated o the matrix p te n
in force. The
as indicated on the
ce must the
n
ar switch must
lled equipment. The
la
;
earth