Instructions For The Installer; Installation; Gas Connection - Kaiser KG Series Manual

Fig. 5 - Abb. 5 -
18
5
INSTRUCTIONS
INSTALLER

INSTALLATION

This appliance is not provided with a combustion
product discharge. I is recommended that it be t
ins lle ta d in sufficiently aerated places, in terms of
the laws in force. The quantity of air which is
n ecess ary for combustion must not be below 2.0
m ³/h for each kW
See ta ble of burner power.
PO IT S IONING
(Fig. 4 ). The appliance can be fitted into a working
area a s illustrated on the corresponding figure.
Ap ply the seal provided
pe rim ter. e

GAS CONNECTION

( Fig. 5 ) Connect the appliance to the gas cylinder
o r to t he installation according to the prescribed
standa rds in force, and ensure beforehand, that
pliance matches the type of gas available.
the ap
Otherwise, see "Adaptation to various types of
gas". Furthermore, check that the feed pressu
falls within the values described on the table:
"User chacteristics".
RIGID/SEMI RIGID METAL CONNECTION
Carry out the connection with fittings and metal
pipes (even flexible pipes) so as to obtain count
stress the inner parts of the appliance.
N.B. - when the installation has been carried out,
check the perfect sealing of the entire connection
system, by using a soapy solution.
GB
FOR THE
of installed power.
over the whole of the area
re
er