dummyhead
dummyhead
CONTROL BOX DISASSEMBLY/ASSEMBLY
Remove the control box (page 11-2).
Installation is reverse order of removal.
• Route the harnesses properly (page 2-4, Base shop manual: page 2-12).
SH type shown:
CONTROL PANEL
BOLT (6 x 12 mm)
GROUND BOLT (6 x 16 mm)
CHOKE CABLE GROMMET
D-AVR
CABLE TIE (2)
OTHER ELECTRICAL
HARNESS CLIP (2)
BOLT (6 x 16 mm) (2)
11-5