3-2. REMOVAL
3.2.1 CONTROL PANEL AND CONTROL BOX
1) Remove the end cover.
Bolt (M5-12L) (2).
2) Remove the wiring from the control panel to
the alternator.
3) Remove the Black wire and White
wire from terminal block.
4) Remove the Green/Yellow wire from
bracket (2).
Bolt (M5-12L) (1)
5) Cut the wire band.
Remove the tube.
Wire band can not be reused.
Replace with new.
6) Remove the cell motor wiring.
18
End cover
Green/Yellow wire
Terminal
block
Bracket (2)
Tube
19
Bolt
Bolt
Black wire
White wire
Wire band
Remove