Page 1
OPERATION, MAINTENANCE & WARRANTY INFORMATION FOR YUNCA WOODBURNERS: WEGJ 2000 (Sub 1.0) HOBSON (Sub 1.0) FITZROY (Sub 1.0) SEPTEMBER 2010 THIS APPLIANCE SHOULD BE MAINTAINED AND OPERATED AT ALL TIMES IN ACCORDANCE WITH THESE INSTRUCTIONS . Welcome. Congratulations on the purchase of your new Yunca Woodburner.
Page 2
by-products to cause damage to closed down. Most of this will OPERATION your heater and its components. burn-off when the heater is N.B. Before lighting your first fire, For the same reason, chemical restarted. Use a damp paper clean the stainless steel flue with a chimney cleaners should be...
Page 3
SIMPLE MAINTENANCE WE RECOMMEND THE FLUE AND UNIT COMPONENTS BE CHECKED ANNUALLY. Replacement of glass, glass seal (packing), door ropes and spare parts. Yunca fires are designed to allow the owner to carry out simple maintenance work such as the replacement of fire bricks, combustion plates, air tubes, door handles and shafts, door rope, glass and glass seals.
Page 4
WARRANTY defective material or workmanship parts and assemblies not in manufacture and/or assembly. genuine, non-approved for This Yunca Woodburner In the case of a claim after the first use by the manufacturer and warranted, with proof of purchase, 12 months, it shall be the owner’s the removal or change of the first owner...
Need help?
Do you have a question about the WEGJ 2000 and is the answer not in the manual?
Questions and answers