Advertisement
Quick Set-up Guide [cont]
10
Tighten the threaded end of the counterweight bar
into the Dec axis of the equatorial mount.
13
The other cable attaches to the R.A. axis gear shaft.
16
Loosen the set screw on the focuser. Remove the
plastic cap covering the end of the focuser.
19
Replace battery cover and tighten. For longer
battery life be sure to turn off finderscope when
not in use.
For detailed usage information please consult your owner' s manual.
WARNING:
without proper filtering!
11
locking
screw
safety
screw
Remove safety screw from the end of the
counterweight bar. Slide the counterweights half
way up the bar and tighten the locking screw to
secure in place. Replace safety screw.
14
Place the telescope tube on the equatorial mount
so that the tube is facing forward as pictured
above.
17
Insert the chrome barrel of the 20mm eyepiece
into the focuser and tighten the set screw.
20
on/off
switch
Remove the lens cap from the front of the
telescope before you begin observing.
Never attempt to view the sun through any telescope
12
Slide the chrome end of the slow motion control
cable onto declination axis gear shaft.
15
Center dovetail in the mount and tighten fastening
screw. For added security tighten the angled lock
down screw next to the fastening screw.
18
Unscrew battery cover for the StarPointer
finderscope. Insert battery with "+" side facing
out.
21
You are now ready to start using you AstroMaster
telescope.
mount
battery
cover
battery
Advertisement
