Dialight ProSite Installation & Operation Instructions page 6

Secondary Retention Cable
Part Number Description
H6XCAB60 Secondary Retention
Cable, Stainless Steel, 60"
H6XCAB72 Secondary Retention
Cable, Stainless Steel, 72"
1. Read and follow all instructions in the
installation manual provided with the
secondary retention cable.
2. Connect the safety cable to one of the
retention brackets on the luminaire.
3. When using a safety cable for secondary
retention, ensure minimum slack in the
cable installation. The slack should be no
greater than 0,3 m [1 ft.]
NOTE: Cable type, size, material, and
attachment method to meet customer
application and to be appropriate with all
local and regional regulations.
F1 Retention Bracket Locations
F1 Retention
Bracket
9100FLM00902 REV B
Page 6 of 25
ProSite Floodlight for CE/RCM
F2 Retention Bracket Locations
F2 Retention
Bracket
Slip Fitter
Base
Retention
Bracket
Photocell
Part Number
SLPC01R
SLPC02R
SLPC03R
WARNING: Photocell models are not rated to
120-250 VDC. Photocell models can only run
on AC voltage.
1. Remove the currently installed shorting cap
on the photocell receptacle. The shorting
cap can be removed by twisting and
pulling.
2. Collect and install the photocell provided.
The photocell can be installed by placing
it into the socket and twisting to lock the
position.
NOTE: The color of the photocell may be
different than what is shown; color is
dependent on photocell model.
3. Power the luminaire on and insure proper
function.
Dialight, 1501 Route 34 South, Farmingdale, NJ, USA 07727
Tel: +1 732 919 3119 Fax: +1 732 751 5778
Description
Photocell, 105-305V
Photocell, 312-382V
Photocell, 432-528V
www.dialight.com