Setup - Gemtek WX-5520A User Manual

WX-5520A Dual Band Access Point
Setup page
The Setup page allow user to configure basic settings. Enter your wireless network's SSID,
select the channel at which the network broadcasts its wireless signal, and enter IP address
and subnet mask for the Access Point. Press Apply & Restart button to save the settings.
IP Address: This IP address must be unique to your network. (The default IP address of
192.168.5.1)
Subnet Mask: The Access Point's Subnet Mask must be same as your Ethernet network.
SSID: The service set identifier ( SSID ) or network name. It is case sensitive and must not
exceed 32 characters, which may be any keyboard character. You shall have selected the
same SSID for all the APs that will be communicating with mobile wireless stations.
8
Wireless Broadband Anywhere