Plinius Inspire 880 Driver Installation

Hide thumbs Also See for Inspire 880:

Plinius Inspire Integrated Ampliﬁ er

USB Driver Installation

The USB input of the Inspire 880 and Inspire 980 integrated ampliﬁ er is supported by the following

operating systems:

• Windows XP – using the provided driver

• Windows 7 (32 and 64 bit) – using the provided driver

• Windows 8 (32 and 64 bit) – using the provided driver

• Windows 10 (32 and 64 bit) – using a driver built into the operating system

• MacOS (10.6.4 and later) – using a driver built into the operating system.

1. Connect the Inspire Integrated Ampliﬁ er to your computer using a USB A to USB B cable.

» Power up the Inspire Integrated Ampliﬁ er and select the USB input. The XMOS Audio 2.0 drivers will

install automatically.

2. Wait a few minutes to allow the installation to ﬁ nish.

» Installation progress and conﬁ rmation can be viewed in Settings > Devices > Connected Devices

The heart of music

www.pliniusaudio.com

Table of Contents

Need help?

Do you have a question about the Inspire 880 and is the answer not in the manual?

Page 1 Plinius Inspire Integrated Ampliﬁ er USB Driver Installation The USB input of the Inspire 880 and Inspire 980 integrated ampliﬁ er is supported by the following operating systems: • Windows XP – using the provided driver • Windows 7 (32 and 64 bit) – using the provided driver •...
Page 2 Plinius Inspire Integrated Ampliﬁ er USB Driver Installation Windows 10 USB Driver Installation (Continued): 3. Open the Control Panel and open Sound to select the Inspire Integrated Ampliﬁ er’s USB input as your computer’s active audio output. » Select the Playback tab and click on XMOS USB Audio.

Inspire 980