Operation - OBSIDIAN CONTROL SYSTEMS NETRON DMX10 Installation Manual

O P E R AT I O N : D M X 1 0 - 5 & D M X 1 0 - 3
The concept of the DMX Splitter is to route the A or B DMX Input to any of the 10 output ports. This
allows flexible configuration of the splitter as needed. It is also possible to ignore one input, and assign
all output ports to the same routing. Ports are assigned to the A or B line by the integrated toggle
switches. The LED color of the output ports indicates the DMX routing.
Switch UP = A (Blue)
Switch Down = B (Orange)
DMX PORTS STATUS INDICATOR LEDs
LED Color
DMX PORTS BLUE
DMX PORTS ORANGE
DMX10-5
(2) 5Pin DMX Input
Note that the A & B letter
positions indicate switch
position for routing
DMX Port Toggle Switch
DMX10-3
(2) 3Pin DMX Input
Note that the A & B letter
position indicates switch
position for routing
DMX Port Toggle Switch
Solid
DMX Traffic
DMX Traffic
(10) 5PIN Opto-Isolated
DMX Outputs
(A up/B down)
(10) 3PIN Opto-Isolated
DMX Outputs
(A up/B down)
10
Blink
No DMX Traffic
No DMX Traffic
DMX Port Status Indicator LED
DMX Port Status Indicator LED
Routing
A
B