Multi Search; T P L I S - FTE Maximal MAX S93 Quick Installation Manual

OSD 30
OSD 31
OSD 32
OSD 33
INSTALLATION
free channels or even scrambled channels. If you select "Yes" it
will scan free channels only.
3. In "Scan Channel" item, press [
+ Radio Channels, just TV channels or just Radio channels.
4. Network Search: If you select this option as "No", the receiver
will search the selected Satellite. In case you select "Yes", the
NIT (Network Identifi cation) will be identifi ed and the receiver
will automatically search all the TP of this network.
5. In "Scan Mode" item you can select "Auto Scan" to blind
scan or "Preset Scan" to scan all preset transponders.
6. Move the highlight to "Search" and press [OK] button to
start scanning. Bars are showing the progress of the channel
scanning in the lower part of the window and the found channels
are listed. You can stop the scan with [Exit] and save the so far
found channels (OSD 30).

4.5. MULTI SEARCH

Entering in this menu, you can make a search in all the
satellites of the list confi gured in the "Satellites list" option. The
confi guration options are the same as in the individual search
section.
After selecting Antenna Setup another window will be opened
(OSD 31).
You can edit the following items:
1. Satellite: Press [OK] to enter satellite list.
2. In the "FTA Only" item, press [
free channels or even scrambled channels. If you select "Yes" it
will scan free channels only.
3. In "Scan Channel" item, press [
+ Radio Channels, just TV channels or just Radio channels.
4. Network Search: If you select this option as "No", the receiver
will search the selected Satellite. In case you select "Yes", the
NIT (Network Identifi cation) will be identifi ed and the receiver
will automatically search all the TP of this network.
5. In "Scan Mode" item you can select "Auto Scan" to blind
scan or "Preset Scan" to scan all preset transponders.
6. Move the highlight to "Search" and press [OK] button to
start scanning. Bars are showing the progress of the channel
scanning in the lower part of the window and the found channels
are listed. You can stop the scan with [Exit] and save the so far
found channels (OSD 32).
4.6. TP LIST
When you open the "TP List" menu you will see a window like
the one beside (OSD 33).
1. Press [ ] to change the marked satellite. Press [
] to change the marked TP.
2. Press [Red] button to open the "Edit TP" menu (OSD 34). Here
PAG. 22
] to select to scan TV
to select to scan only
] to select to scan TV