Operation
Removing the track head from the track
□
track head (G) to cool down.
□
Pull down on the track head connector's locking tab (H), and twist until
the track head (G) disengages.
Care and Cleaning
□
□
Use a dry or slightly dampened, clean cloth (use clean water, never use a solvent) to wipe the interior and exterior surfaces of the
□
CAUTION:
Troubleshooting
Problem
The light will not illuminate.
Possible Cause
□
The power is off.
□
There is a faulty wire connection.
□
There is a faulty switch.
H
Solution
□
Make sure the power supply is on.
Check the wiring.
□
□
you are not comfortable troubleshooting
wiring problems.
□
Test or replace the switch.
8
F
G