English Important Note / Before Installing; Information On Etl Certified Sensors - Rechner Sensors IAS-10 Series Instruction Manual

Thank you,
for choosing a device from RECHNER Sensors. For 55 years RECHNER Sensors has established a
global leadership position for capacitive sensors with commitment to product innovation, performance
and the highest quality.
Important Note:
Please read carefully and pay full attention to this instruction manual before powering up
this device for the first time. The use and initial operation of this device is only permitted for
qualified persons with knowledge of protection classes, regulations and provisions for apparatus
in hazardous areas and who are familiar with the instruction manual and the current rules of
safety in the work place and accident-prevention.
Removal of the serial number, changes to the units or improper use are not permitted.
Symbols
i
Information: Additional note
Caution: Important note / safety note
Action required: An action or an adjustment is necessary
Follow these instructions for proper and safe use. Keep for future reference.
Before Installing
• Unpack the device and check that your delivery is complete, correct and that there is no damage
• If there is any damage, please inform your supplier and those responsible for delivery
• If you have any questions or require support we are available to help you find a solution

Information on ETL certified sensors

ETL certified sensors:
Indoor use only
Listed Component Conforms to UL Std. 61010-1
Certified to Can/CSA Std. C22.2 No. 61010-1
For use in class 2 circuit only
3110580
Uniquement pour utilisation dans circuits classe 2
© RECHNER 02/2022, # 79002101 Printed in Germany
All specifications are subject to change without notice.
8
QR code for advanced
adjustment instructions