Advertisement
5.1.4.
Insert the high pressure hose tightly into the quick coupling on the appliance. See fig. 4.
5.1.5.
Screw the coupling element to the water connection on the appliance.
5.1.6.
Attach the water supply hose to the coupling on the water connection.
NOTE:
The supply hose is not included.
5.1.7.
Connect the water supply hose to the water supply.
5.1.8.
Completely open the water tap.
5.1.9.
Insert the mains plug into the socket.
5.1.10.
Turn on the appliance "I/ON". See fig 4.5
5.1.11.
Unlock the lever on the pressure washer gun. See fig.5
5.1.12.
Pull on the lever of the pressure washer gun; the device will switch on.
5.1.13.
Switch the appliance on for a (max. of 1 minute) and wait until the water exits at the hand spray gun without bubbles.
5.1.14.
Release the lever on the pressure washer gun.
NOTE:
Release the lever of the pressure washer gun; the device will switch off again.
5.1.15.
High pressure remains in the system.
5.1.16.
Lock the lever on the pressure washer gun. See fig. 6.
5.2.
HIGH PRESSURE LANCE
5.2.1.
Push the spray lance into the pressure washer gun and fasten it by turning it through 90°. See fig. 7
5.2.2.
Unlock the lever on the pressure washer gun.
5.2.3.
Pull on the lever of the pressure washer gun; the device will switch on. See fig. 8
© Jack Sealey Limited
fig.6
fig.7
Original Language Version
fig.4
fig.8
fig.5
PW1850 Issue 2 (2) 10/02/21
Advertisement
