Safety Precautions - Cecilware ME10-GN Operation Manual

DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND
LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.
THIS INSTALLATION MUST CONFORM WITH THE NATIONAL FUEL GAS CODE,
WARNING: IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE
OR MAINTENANCE CAN CAUSE PROPERTY DAMAGE, INJURY OR DEATH. READ
THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT.
FOR YOUR SAFETY, THE FOLLOWING SAFETY PRECAUTIONS SHOULD
IF YOU SMELL GAS:
OPEN WINDOWS
DON'T TOUCH ELECTRICAL SWITCHES
EXTINGUISH OPEN FLAMES
IMMEDIATELY CALL YOUR GAS SUPPLIER
1. Instructions must be posted in a prominent location and all safety precautions taken
in the event the user smells gas. Obtain this information from your local gas supplier.
2. LIGHTING: Follow the instruction on page 2 and label attached to right side of the
water boiler.
3. Do not place anything over the flue opening.
4. Do not place combustibles or non-combustible materials in the proximity of coffee
urn as this could cause fires or obstruct air flow to the main burners.
5. This installation must conform with local codes, or in absence of local codes with the
National Fuel Gas Code ANSI Z223.1, latest edition.
6. Provide adequate air supply and ventilation.
7. Provide adequate clearance for air openings into the combustion chamber.
8. Provide clearance for servicing and proper operation. Minimum clearance from
combustible construction 8" from back and 6" from side.
9. Boiler must be disconnected from gas supply during any pressure testing of
pipelines in excess of ½ psig, and isolated (by turning off gas shut-off valve) during
any testing less than ½ psig.
10. Retain this manual for future reference.
UNPACKING INSTRUCTION: Carefully unpack the water boiler and inspect immediately
for shipping damages. Your automatic water boiler was shipped in a carton designed to
give maximum protection in normal handling. It was thoroughly inspected before
leaving the factory and the carrier accepted and signed for it. File any claims for
shipping damage or irregularities with the carrier.
FOR YOUR SAFETY
ANSI Z223.1 (LATEST EDITION).

SAFETY PRECAUTIONS

BE FOLLOWED AND ENFORCED.
2