Stretch Stitching; Stitch Width Dial; Reverse Sewing Lever - Brother XL-2610i Operation Manual

Stretch Stitching

Raise the needle to its highest position by turning the
handwheel toward you (counterclockwise) so that
the mark on the handwheel points directly up.
■ 35 Stitches
Selecting a Stretch Stitch
Setting the stitch length dial to "
changes the selected pattern to a stretch stitch.
■ 25 Stitches
Selecting a Stretch Stitch
Setting the stitch length dial to "
selected pattern to a stretch stitch.

Stitch Width Dial

Raise the needle to its highest position by turning the
handwheel toward you (counterclockwise) so that
the mark on the handwheel points directly up.
The numbers marked on the dial represent the stitch
width.
THE HIGHER THE NUMBER, THE WIDER THE
" or " "
STITCH.
.
" changes the

Reverse Sewing Lever

You can use reverse sewing for back tacking and
reinforcing seams.
To sew in reverse, push the reverse sewing lever in
as far as possible and hold it in that position while
you lightly push the foot controller. To sew forward,
release the reverse sewing lever. The machine will
then sew forward.
Note
● When the Straight or Triple Stretch Stitch is
selected, the needle position can be
changed from left to right by adjusting the
stitch width dial.
1
1 Stitch width dial
1 Reverse sewing lever
1
1
15