Optional Accessories; Using The Walking Foot - Brother XL-2610i Operation Manual

OPTIONAL ACCESSORIES

Using the Walking Foot

Stitch Name Pattern
Straight Stitch
Zigzag Stitch
This foot is very useful for sewing materials such as
vinyl cloth, synthetic leather, thin leather, etc. These
materials are difficult to feed when sewing. The
walking foot prevents these materials from
crumpling, slipping or sticking between the presser
foot and the material.
Note
● Only use the walking foot with straight or
zigzag stitches. Do not use other patterns.
Reverse stitches can not be sewn with the
walking foot.
1 Turn off the machine.
2 Raise the needle and the presser foot.
3 Loosen the presser foot screw to remove the
presser foot holder.
2
1
1 Use a coin or screwdriver
2 Presser foot holder
3 Presser foot screw
Stitch Stitch
Length Width
[mm (inch)] [mm (inch)]
1-4 2-3
(1/16-3/16) (1/16-1/8)
1-4 0-5
(1/16-3/16) (0-3/16)
3
4 Attach the forked section of the connecting
lever to the needle clamp, and fit the walking
foot to the presser bar.
2
3
1 Forked part of operation lever
2 Presser bar holder
3 Needle clamp
5 Lower the presser foot lever and then tighten
the presser foot screw.
1 Presser foot screw
1
1
41
5