Table of Contents
Advertisement
PLEASE READ THE FOLLOWING INSTRUCTION CAREFULLY
1.1
- GENERAL USE, MAINTENANCE AND SAFETY INSTRUCTION
•
The slicer must be operated only by highly qualified people who are fully aware of the safety
measures described in this manual. It is the responsibility of the owner to ensure that the slicer
is properly and safely used.
•
Although the slicer is equipped with safety devices in the dangerous points, KEEP HANDS
CLEAR OF THE BLADE AND ALL MOVING PARTS.
•
Before starting cleaning and maintenance, ALWAYS UNPLUG THE SLICER.
•
Be particularly alert when protection devices are removed to carry out cleaning and
maintenance.
•
Cleaning and maintenance requires great concentration.
•
A regular check of the power supply cords is absolutely necessary; a worn-out or damaged
cord can expose users to electric shock hazard.
•
If the slicer doesn't work properly, don't use it and don't attempt to service it yourself.
•
Do not use the slicer to cut frozen products, meat and fish with bones or any other product other
than food.
•
Use the slicer only with the help of the pusher.
•
Do not place yourself in a dangerous position; the blade may cause serious injuries.
•
Do not expose slicer to water or moisture. Do not keep it in places where electrical parts may
enter in contact with water.
•
Retain this instruction manual for future reference.
•
The manufacturer is not liable for slicer malfunction in the following cases:
If the slicer has been tampered with by non-authorized personnel
If some parts have been substituted with non original spare parts
If the instructions contained in this manual are not followed accurately
If the slicer is not cleaned and oiled with the right products
1.2
- SAFETY SYSTEMS INSTALLED IN THE SLICER
1.2.1
Mechanical Safety System
The mechanical safety system of the slicer described in this manual includes:
•
blade guard
•
cover
•
meat pusher
•
hand cover on product table
•
product table + finger protection
1.2.2
Electrical safety Systems
The safety system installed to protect users against electrical risks includes a micro-switch which stops
the slicer in case the tie rod for blade guard is removed (see Fig. No.1);
The micro-switch prevents restarting the slicer if the guard has not been set to the off position.
The blade and other parts of the machine can cause serious cuts and injuries. Do not touch
them without taking the proper measures shown in this manual.
3
Hide quick links:
Advertisement
Table of Contents
