Chicco KEYFIT Instructions Manual page 28

1. The child car seat is intended for children
weighing up to 13 Kg.
2. Never fi t this child car seat into a front seat
equipped with frontal airbag. Fit the child
car seat into the front seat only if the fron-
tal airbag has been deactivated: check with
the car manufacturer, or in the car instruc-
tions manual, whether the airbag can be
deactivated.
3. Never use the mini insert if the child weighs
more than 6 Kg.
CAR SEAT AND SAFETY BELT REQUIREMEN-
TS
The child car seat may be fi tted to the front
passenger seat or any rear seat, but with the
following restrictions. The child car seat must:
- be fi tted in a front-facing position (diag.1)
- be fi tted with a 3-point static or 3-point
retractor safety belt (diag.2A).
CAUTION! Never fi t the child car seat into a
car seat if it is only equipped with a lap belt
(diag. 2B).
HOW TO ADJUST THE SAFETY HARNESS
WARNING! The safety harness must always be
adjusted to the size of the child's body.
Before fi tting the child car seat into the car, it
is necessary to adjust the height of the child's
safety harness.
The correct position of safety harness is slight-
ly below the child's shoulders (diag. 3). The
height of the child car seat can be adjusted to
3 positions (diag. 4).
The child car seat has a mini insert which
ensures maximum protection and comfort
to children from birth up to 6 Kg of weight
(diag. 5).
Before fi tting the mini insert, check that the
belts are inserted into the hole located in the
lowest position: this is the only position al-
lowed for using this accessory.
WARNING! For your child's safety: Do not use
the mini insert if the child weighs more than
6 Kg.
INSTRUCTIONS
Components
A. Fabric cover
B. Mini insert
C. Sun canopy
D. Diagonal safety belt's side guides
E. Adjustment belt
F. Button for adjusting the safety harness
G. Safety harness' holes
H. Handle
I. Handle adjustment buttons
J. Button for locking/unlocking the child car
seat from the stroller
K. Diagonal safety belt's guide
L. Anchor-shaped hook
M. Side button for locking / unlocking the sun
canopy
N. Side elastics for fi xing the fabric cover
O. Safety belts
P. Safety harness straps
Q. Safety belt's buckle
R. Button for opening the buckle
Index
• How to adjust the height of the safety har-
ness
• How to fi t the child car seat into the car
• How to place the child into the child car
seat
• How to adjust the handle
• Child car seat in the bouncing or baby chair
position
• How to remove the fabric cover
• How to fi t the child car seat to the stroller
HOW TO ADJUST THE HEIGHT OF THE SA-
FETY HARNESS
1. Unfasten the safety harness, pressing the
red button located on the buckle (diag. 6).
2. Remove the two ends of the safety harness
from the anchor-shaped hook, as shown in
diag. 7.
3. Remove the two parts of the safety harness
from the front of the child car seat, and in-
sert them into the hole which is most suit-
able to the child's height (diag. 8).
4. Re-insert the two ends of the safety har-
28