Sewing On Very Thin Fabric; Hyvin Ohuen Kankaan Ompeleminen; Cómo Coser Tela Muy Delgada - Brother X-3 Instruction Manual

Brother sewing machine instruction manual
Hide thumbs Also See for X-3:
Table of Contents

Advertisement

Removing the Fabric from the Machine
1. Stop the machine.
2. Turn the balance wheel toward you (counterclockwise) to bring the
needle and thread take-up lever to their highest position.
3. Lift the presser foot and pull the fabric out gently to the left side.
4. Cut both threads using the thread cutter located on the back of the
presser foot bar.
1 Thread cutter
5. To prepare the machine for the next seam, pull about 10 cm (4") of
thread through the toes of the presser foot toward the back of the
machine.

Sewing on Very Thin Fabric

An underlay of thin paper will act as a stablizer and will help to elimi-
nate skipped stitches and fabric puckering when sewing on very thin
fabric.
Para retirar el tejido de la máquina
1. Pare la máquina.
2. Gire la ruedecilla hacia usted (en el sentido contrario al de las
manecillas de un reloj) para levantar la aguja y la palanca tirahilos
a su posición más alta.
3. Levante el prensatelas y saque suavemente el tejido por la iz-
quierda.
4. Corte ambos hilos con el cortador que se encuentra detrás de la
barra del prensatelas.
1 Cortador de hilos
5. Con el fin de dejar la máquina preparada para la próxima costu-
ra, pase unos 10 cm (4") de hilo por los salientes del prensatelas
hacia la parte posterior de la máquina.
Cómo coser tela muy delgada
Un papel delgado debajo de la tela le permitirá estabilizarla y le ayu-
dará a evitar que se salten puntadas o que se produzcan fruncidos
al coser en tejidos muy finos.
29
Kankaan irrottaminen koneesta
1. Pysäytä kone.
2. Nosta neula ja langannostaja niiden yläasentoon kääntämällä käsi-
pyörää itseäsi kohti (vastapäivään).
3. Nosta paininjalka ja vedä kangas varovasti vasemmalle.
4. Katkaise molemmat langat paininjalan tangon takaosassa olevalla
langankatkaisijalla.
1 Langankatkaisija
5. Valmistele kone seuraavaa saumaa varten vetämällä lankoja noin
10 cm (4 tuumaa) paininjalan varpaiden välistä taaksepäin.

Hyvin ohuen kankaan ompeleminen

Ohut vahvikepaperi toimii vakaajana ja auttaa estämään hyppypistoja
ja kankaan rypyttymistä, kun ompelet hyvin ohutta kangasta.
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sewing machineJs 20

Table of Contents