Table of Contents
Advertisement
Quick Links
Huskvarna, 2018-03-12
Safety and Operating Instructions
Dear customer,
thank you for choosing a Husqvarna quality product. We hope that you will genuinely enjoy it.
Please note that the enclosed manual contains Atlas Copco references.
The Husqvarna Group is vouching for the quality of this product.
If you have any questions, please do not hesitate to contact our local sales or service point.
Husqvarna AB
561 82 Huskvarna, Sweden
Advertisement
Table of Contents
Related Manuals for Husqvarna BV 20E
Summary of Contents for Husqvarna BV 20E
- Page 1 Safety and Operating Instructions Dear customer, thank you for choosing a Husqvarna quality product. We hope that you will genuinely enjoy it. Please note that the enclosed manual contains Atlas Copco references. The Husqvarna Group is vouching for the quality of this product.
- Page 2 20E, 20G Safety and operating instructions Vibrating screeds © 2015 Construction Tools EOOD | No. 9800 1189 01b | 2015-05-12 Original instructions...
- Page 3 TO PURCHASE THIS PRODUCT PLEASE CONTACT US Equipment Financing and Extended Warranties Available Discount-Equipment.com is your online resource for commercial and industrial quality parts and equipment sales. 561-964-4949 visit us on line @ www.discount-equipment.com Select an option below to find your Equipment We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman, Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto, Power Blanket, Nifty Lift, Atlas Copco, Chicago Pneumatic, Allmand, Miller Curber, Skyjack, Lull,...
-
Page 4: Table Of Contents
BV 20E, 20G Contents Contents Introduction............... . 5 About the Safety and operating instructions. - Page 5 Contents BV 20E, 20G EC Declaration of Conformity............22 EC Declaration of Conformity .
-
Page 6: Introduction
BV 20E, 20G Safety and operating instructions Introduction Thank you for choosing a product from Atlas Copco. Since 1873, we have been committed to finding new and better ways of fulfilling our customers' needs. Through the years, we have developed innovative and ergonomic product designs that have helped customers improve and rationalize their daily work. -
Page 7: Safety Instructions
Safety and operating instructions BV 20E, 20G Only qualified and trained persons may operate or Safety instructions maintain the machine. They must be physically able to handle the bulk, weight, and power of the machine. To reduce the risk of serious injury or death to... -
Page 8: Personal Safety
BV 20E, 20G Safety and operating instructions Do not expose the power tool to rain or wet ► WARNING Slipping, tripping and falling conditions. hazards If water enters the machine, there is an increased There is a risk of slipping or tripping or falling, for risk of electrical shock. -
Page 9: Operating, Precautions
Safety and operating instructions BV 20E, 20G Work in a well ventilated area. ► WARNING Broken power switch The power switch does not control the machine. A ► If the machine has an exhaust, direct the exhaust broken power switch is dangerous and must be so as to reduce disturbance of dust in a dust filled repaired. -
Page 10: Maintenance, Precautions
BV 20E, 20G Safety and operating instructions WARNING Vibration hazards WARNING Noise hazard Normal and proper use of the machine exposes the High noise levels can cause permanent and disabling operator to vibration. Regular and frequent exposure hearing loss and other problems such as tinnitus to vibration may cause, contribute to, or aggravate (ringing, buzzing, whistling, or humming in the ears). -
Page 11: Overview
BV 20E is a single-phase electrical vibrator with eccentric weights attached to each side of the motor. BV 20G is a vibrator with petrol driven motor with eccentrics. -
Page 12: Safety Label
BV 20E, 20G Safety and operating instructions Operation Construction Tools EOOD Type XXXXX Preparations before vibrating Serial No. XXXXXX XXXX kW XX kg For transport Made in xxxxx XXXX The beam is equipped with a lifting eye. Petrol drive unit Machine type. -
Page 13: Preparations
4. Close the fuel valve before refuelling. 5. Always use a filter when refuelling. 6. Wipe up any spilled fuel before starting up the motor. General inspection Before using the BV 20E: Preparations 1. Clean and inspect the machine and the functions BV 20E before use. -
Page 14: Operation
2. Check for leaks and damages. 3. Check that the engine speed lever is set to idle. Operation Starting up BV 20E 1. Check the machine's power supply connector for any damages. 2. Connect the plug (A) to an electrical outlet with the correct power supply. - Page 15 Safety and operating instructions BV 20E, 20G 5. Press the primer until the fuel can be seen in the 1. Reduce the speed by turning the control lever to fuel return pipe. position 0. 2. Set the switch to the “OFF” position.
-
Page 16: Adjusting The Work Angle
4. Pull the beam backwards. The eccentric weights are directly driven by the rotor on BV 20E and by the engine shaft on BV 20G. This 5. Simultaneously turn the handle link to adjust the means that the vibration starts as soon as the... -
Page 17: Every 10 Hours Of Operation (Daily)
Safety and operating instructions BV 20E, 20G Before starting maintenance on the machine, clean ♦ First 10 hours (first month) it in order to avoid exposure to hazardous Drain the engine. substances. See “Dust and fume hazard”. Every 100 hours of operation Use only authorised parts. -
Page 18: Disposal
BV 20E, 20G Safety and operating instructions Disposal A used machine must be treated and disposed in such way that the greatest possible portion of the material can be recycled and any negative influence on the environment is kept as low as possible, and in accordance with local restrictions. -
Page 19: Troubleshooting
Safety and operating instructions BV 20E, 20G Troubleshooting Problem Model Cause Solution The screed does not start. Petrol drive. The engine is set to the OFF Set the engine to ON position. position. The petrol tank is empty. Fill the tank. -
Page 20: Technical Data
BV 20E, 20G Safety and operating instructions Technical data Machine data BV 20E BV 20G Model Honda GX25 NT-STCS-OH Voltage, (V) Phases Frequency, (Hz) 50/60 Power, kW (HP) 0.27 0.72 Protection IP57 Speed, r.p.m. 2,000 - 10,000 7,000 Weighted effective acceleration uncertainty (K) *(ft/s (10.49) -
Page 21: Noise Data
Safety and operating instructions BV 20E, 20G This machine may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to managing hand-arm vibration can be found at http://www.humanvibration.com/humanvibration/EU/VIBGUIDE.html We recommend a programme of health surveillance to detect early symptoms which may relate to vibration exposure, so that management procedures can be modified to help prevent future impairment. - Page 22 BV 20E, 20G Safety and operating instructions 2000 © 2015 Construction Tools EOOD | No. 9800 1189 01b | 2015-05-12 Original instructions...
- Page 23 Safety and operating instructions BV 20E, 20G EC Declaration of Conformity EC Declaration of Conformity We, Construction Tools EOOD, hereby declare that the machines listed below conform to the provisions of EC Directive 2006/42/EC (Machinery Directive), and the harmonised standards mentioned below.
- Page 24 TO PURCHASE THIS PRODUCT PLEASE CONTACT US Equipment Financing and Extended Warranties Available Discount-Equipment.com is your online resource for commercial and industrial quality parts and equipment sales. 561-964-4949 visit us on line @ www.discount-equipment.com Select an option below to find your Equipment We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman, Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto, Power Blanket, Nifty Lift, Atlas Copco, Chicago Pneumatic, Allmand, Miller Curber, Skyjack, Lull,...
- Page 25 Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings.