Memory Error Message - Casio Cassiopeia EG-800 Getting Started Manual

• The unit performs a reset followed by a memory check operation.
If no data error is found, the following two screens appear on the display in succession.
• Startup screen
• Desktop
2. Normal unit operation is possible after the desktop appears.
• Memory data and settings are retained when you reset the Pocket PC.
Important
If the above operation does not solve the problem, perform a full reset (memory
initialize, page 32).

Memory Error Message

If the memory check operation that the unit performs when the RESET button is
pressed detects a data error, the following message appears on the screen instead of the
startup screen.
"A problem with memory contents has been found. Press [Action] to continue with
the reset procedure, which restores normal system operation.
Note that if the system determines that user memory cannot be repaired, it will
delete all user data currently in memory.
See the User's Guide for details about initializing memory."
This message indicates that the memory error is fatal and so recovery is impossible.
Press the [Action] control to execute a full reset (memory initialize), which deletes all
data stored in memory.
• Pressing the [Action] control should display the Startup screen followed by the touch
screen calibration screen. The remainder of this procedure identical to the Initial
Setup described in the Quick Start Guide. Perform the steps of the Initial Setup
procedure.
• If pressing the [Action] control returns to the desktop without displaying the startup
screen first, see the following explanation for the procedure you need to follow.
What to do if the startup screen does not appear when you press the
[Action] control
Even though the desktop appears when you press the [Action] control, there is still a
data error in memory and you have to perform a full reset (memory initialize). Before
you do, however, there is the chance that some of the data in memory can be recalled
and even transferred to a computer. Try recalling the data you need before performing
the procedure described on the next page to perform a full reset.
31