Time/Day Stamp; Set Voice Time/Day Stamp; Time Check - Casio PhoneMate TA-150 Owner's Manual

TIME/DAY STAMP

SET VOICE TIME/DAY
STAMP
During message playback, a synthesized voice
will announce the current time and day of the
week. To set the current time and day of the week:
TIME SET
1
Press (under the lid).
(Caution, this is different than the
Greeting Time Set button.)
You will hear:
TIME
SET
2
SKIP REPEAT
Press or
correct day is announced.
REPEAT
3
TIME SET
Press to set the hour.
4
SKIP
Press to advance or
to reverse the hour. The LCD will display
the hour setting:
1:00
Saturday,
2:32 a.m.
Sunday
CHECK
until the
Saturday
Enter hour.
REPEAT
AM
5
TIME SET
Press to set the minutes.
Enter minute.
SKIP
6
Press to advance or
to reverse the minutes.
2:01
TIME SET
7 Press again to end. The day
and time will be announced and time set
is complete.
2:32
AM
NOTES:
If the time and day have not been set, all messages will
be stamped with " Sunday 12:00 a.m ."
When experiencing a power failure, the TA-150 will
maintain the clock function for up to 20 minutes. After 20
minutes, the clock reverts to the factory default setting of
Sunday, 12:00 a.m., and "12:00 AM" will flash in the LCD.
All other stored information and settings including;
Remote Access Code, Greetings and Incoming Messages
will be saved and normal operation will resume when
power is restored.

TIME CHECK

In addition to the LCD clock, a synthesized voice
announces the time and day.
1
TIME CHECK
Press
TIME
SET CHECK
PAGE
7 7 7 7 7
REPEAT
AM
Saturday,
2:32 a.m.
. (Under the lid.)
Wednesday,
2:30 p.m.