Check Programmed Times For Timer Greeting Mode - Casio PhoneMate TA-150 Owner's Manual

NOTES:
The TIMER-SELECT MODE can only set to the hour.
Minutes cannot be programmed in this mode.
GREETING 2 must always be set to a later time than
GREETING 1. If both GREETING 1 and GREETING 2
are set to the same time, or GREETING 1 is later than
GREETING 2, an error tone will be heard and the unit will
revert to the last properly programmed and sequenced
times for GREETING 1 and GREETING 2.
Failure to record both greetings prior to setting this
mode, may possibly result in callers hearing the pre-
programmed greeting, " Please record a message after
the tone. " Greetings cannot be recorded while in the
TIMER-SELECT MODE. If you try to record a greeting,
by pressing GREETING RECORD while in this mode,
the machine will rapidly beep three times.
GREETING
RECORD CHECK SELECT TIME SET
TIME CODE SET
SET CHECK
CONV RECORD
MEMO RECORD
SKIP
FAST
REPEAT
SLOW
ANNOUNCE ONLY ON/OFF
CODE CHECK
GREETING 1 2
12:30
PM
MESSAGE FILE
+
PLAY/
_
PAUSE
PREVIEW NEW
ALL
CHECK PROGRAMMED
TIMES FOR TIMER
GREETING MODE
To review the times programmed in the TIMER
GREETING MODE:
1
GREETING TIME SET
Press
(Under the lid.) The display will show the
activation time for GREETING 1. For
example, "8:00 AM" will appear and you
will hear:
GREETING
RECORD CHECK SELECT
GREETING 1
8:00
AM
2
GREETING TIME SET
Press
and the TA-150 will announce the
activation time for GREETING 1. The
LCD clock will then display the time set
for GREETING 2.
GREETING 2
5:00
PM
3
GREETING TIME SET
Press
TA-150 will announce the time for
GREETING 2.
PAGE
11 11 11 11 11
.
TIME SET
Enter the time
for greeting one.
again
8:00 a.m.
Enter the time for
greeting two.
. The
5:00 p.m.