Timer-Select Mode - Casio PhoneMate TA-150 Owner's Manual

PAGE
GREETING MODES
10 10 10 10 10

TIMER-SELECT MODE

In the TIMER-SELECT MODE, programmed
GREETING 1 and GREETING 2 play at specific
times. The TA-150 is shipped with the TIMER-
SELECT MODE set as follows:
GREETING 1 will play between 8:00 a.m.
and 5:00 p.m. with "GREETING 1" and
CLOCK icon appearing in the display.
GREETING 2 will play between 5:00 p.m.
and 8:00 a.m. with "GREETING 2" and
CLOCK icon appearing in the display.
1
GREETING 1 and 2 need to be recorded
prior to programming the
SELECT MODE
"Record Greeting".)
2
GREETING SELECT
Press
the lid) until CLOCK icon and "GREETING
1" or "GREETING 2" appears in the LCD,
depending upon the time, and you hear:
GREETING
RECORD CHECK
GREETING 1
10:00
NOTE:
If you hear "Enter the time", the main clock needs to be
set. The TIMER-SELECT MODE will not work correctly
unless the main clock is set. Please see page 7 to set
the clock.
3
GREETING TIME SET
Press
the lid) to change the time for GREETING
1. The pre-set time of "8:00 AM" or the
last programmed time will appear in
display for GREETING 1.
GREETING
RECORD CHECK SELECT
TIMER-
. (See page 8, to
(under
SELECT TIME SET
AM
Timer-Select
(under
Enter the time for
TIME SET
greeting one.
4 SKIP
Press to advance or
reverse the hour, until the desired time
appears in the display for GREETING 1.
SKIP
GREETING 1
5
GREETING TIME SET
Press
to end. The programmed time for
GREETING 1 to start playing will be
announced.
6
Once GREETING 1 is set, the time
display will automatically change to the
pre-set time or the most recently
programmed time for GREETING 2.
You will then hear:
7 SKIP
Press to advance or
reverse the hour, until the desired time
appears in the display for GREETING 2.
GREETING
6:00
8
GREETING TIME SET
Press
to finish programming the TA-150 to play
the two greetings for the TIMER-SELECT
MODE. The programmed time for
GREETING 2 to play will be announced.
REPEAT
to
9:00
AM
again
9:00 a.m.
Enter the time
for greeting two.
REPEAT
to
2
PM
again
6:00 p.m.