Page 2
This motion operates the rotary switch to the desired position before coming to rest against a hard stop. In order for the RSA-107 to function optimally, it must be properly adjusted either by CBS ArcSafe® prior to delivery or on-site by a qualified technician.
Page 3
3. To cycle switch, depress the applicable “CLOSE” and “TRIP” pushbuttons on the RSO-I. Hold down the applicable pushbutton until the switching operation is complete. Hard stops on the RSA-107 will prevent over-travel of the RSA-107 switching arm. To remove the RSA-107 after the remote switching operation, reverse steps 1-6 of the installation section.