Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SCHOTT KL 300 LED
Summary of Contents for SCHOTT KL 300 LED
- Page 1 KL 300 LED User Manual...
-
Page 2: Table Of Contents
KL 300 LED – Operating instructions Contents Important information.............…..3 Operation..................... 5 Assembly..................... 5 Light guide connection........…........5 Power connection................6 Start-up procedure........…........6 Light intensity setting…..........…......6 Maintenance..........…....…....7 Troubleshooting..................7 Accessories..........…......…..….. 7 Technical data.......…............8 Status: March 2016... - Page 3 KL 300 LED – Operating instructions Instrument overview Light guide socket Indicator light On/off switch Mains connection socket Attachment adapter socket (base of instrument) Heat sink Electronic light intensity setting Model plate (base of instrument)
-
Page 4: Important Information
In accordance with the EN 62471:2008 standard the KL 300 LED is a product of Risk Class 2. The KL 300 LED fiber optic light source conforms to the following European directives:... - Page 5 To avoid unnecessary stressing of biological tissue by illuminating with visible light, reduce the brightness and duration of illumination to the absolute minimum required level. Please make sure that your KL 300 LED cold light source is operated at the voltage stated on the model plate (8).
-
Page 6: Operation
If necessary, the microscope or the microscope carrier must be taken off and re-assembled afterwards. Alternatively, when using flexible light guides, the KL 300 LED can be laid flat on the work surface without an attachment adapter. 2.2 Light guide connection The light guide is inserted into the light guide socket as far as the stop (1). -
Page 7: Power Connection
0 the instrument is not switched off. When the instrument is switched on the blue control light (2) is lit. To switch off the KL 300 LED press the on/off switch (3) once (see point 2.4 “Start-up procedure”). Please ensure safe power disconnection by pulling out the power plug! 3. -
Page 8: Troubleshooting
5. KL 300 LED accessories A wide range of accessories is available for your KL 300 LED. Please see our separate catalogue for further details (contact address for additional requirements can be found on page 10). Proper functioning, safety and optimum luminous efficiency can only be guaranteed with SCHOTT light guides and accessories. -
Page 9: Technical Data
KL 300 LED – Operating instructions 2.1 “Assembly”). A base with a corresponding fixing devise is available for use with self-supporting light guides. Please also refer to our catalogue for more information. 6. Technical data for KL 300 LED Properties Values... - Page 10 We reserve the right to make changes in the design and supplied items within the scope of on-going technical improvements. WEEE declaration Your SCHOTT product was produced and developed with high quality materials and components. The symbol indicates that electrical and electronic devices must be separated from domestic waste and appropriately disposed of after useful life.
- Page 11 SCHOTT North America, Inc. 122 Charlton Street Southbridge, MA 01550 Phone + 1 (508)765-9744 Fax + 1 (508)764-6273 lightingimaging@us.schott.com www.us.schott.com/microscopy...