Safety Warnings; Save All Warnings And Instruc- Tions For Future Reference - Makita DTR180 Instruction Manual

Symbols
The followings show the symbols which may be used for the equip-
ment. Be sure that you understand their meaning before use.
Read instruction manual.
Wear safety glasses.
Do not expose to rain.
Keep hands away from the wire reel or wire
when operating the tool.
Keep hands away from the tool tip.
Only for EU countries
Ni-MH
Do not dispose of electric equipment or battery
Li-ion
pack together with household waste material!
In observance of the European Directives, on Waste
Electric and Electronic Equipment and Batteries and
Accumulators and Waste Batteries and Accumulators
and their implementation in accordance with national
laws, electric equipment and batteries and battery
pack(s) that have reached the end of their life must
be collected separately and returned to an environ-
mentally compatible recycling facility.
Intended use
The tool is intended for tying rebars.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745-2-18 (EN12549):
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
NOTE: The declared noise emission value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may
also be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the tool is
used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched off and when
it is running idle in addition to the trigger time).
) : 78 dB(A)
pA
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745-2-18 (ISO8662-11):
Work mode: Tying metal rod
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING:
use of the power tool can differ from the declared val-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING:
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched off and when
it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings
WARNING:
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Cordless rebar tying tool safety warnings
Never point the tool toward a person. Never put
1.
your hands or feet close to the tool tip. If you
accidentally operate the tool while it is touching
someone, it will lead to an unexpected accident.
Do not load wire while the power to the tool is turned
2.
on. Otherwise, you may get caught in the wire and injured.
3. Do not use the tool without closing the reel
cover. Otherwise, the wire reel may come off and
cause an accident.
4. Be sure to check that the diameters of rebars
to be tied are within the tool capacity before
beginning work.
12 ENGLISH
2
) : 2.5 m/s or less
h
2
The vibration emission during actual
Be sure to identify safety measures
Read all safety warnings, instruc-