Indicator
Flash Memory
Update
a
Except when in sleep mode or when a Good Read LED Duration other than 00 is selected
Error Codes
Upon startup, if the reader's LED2 and Green Spot are blinking alter-
nately, this means the reader has not passed its automatic Selftest and has
entered FRU (Field Replaceable Unit) isolation mode. If the reader is re-
set, the sequence will be repeated. Press and release the trigger to see the
FRU indication code from LED2 flashes.
The following table describes the LED flashes associated with an error
found.
Number of
LED2 Flashes
1
2
6
11
Integration Guide
Description
Occurs while update is in progress
Error
Configuration
Interface PCB
Digital PCB
Imager
LED L2 of J2
Blue LED blinks
Corrective Action
Contact Helpdesk
for assistance
25