Panasonic EH-NE83 Service Manual page 4

3. TROUBLESHOOTING GUIDE
Refer to WIRING CONNECTION DIAGRAM.
< TROUBLE >
Main body is
not operated
*For code : 605, 655, 685, 695, 865
<CHECK POWER CORD>
Check the conductivity of power cord
<CHECK MAIN SWITCH>
Check the conductivity between the terminal 1
and 4 by setting
the MAIN SWITCH to Position 1
Lead Wire (Gray)
Lead Wire (Orange)
< CHECK >
OK
(Figure 4)
MAIN SWITCH
< REMEDY >
NG
Replace the
MOTOR HEATER
ASSEMBLY
NG
Replace the
MAIN SWITCH
OK
Replace the
MOTOR HEATER
ASSEMBLY
Lead Wire (Yellow)
Figure 4
Lead Wire (Red)