Entering The Password When Turning On The Projector - Casio XJ-S31 User Manual

Casio xj-s31: user guide
Hide thumbs Also See for XJ-S31:
Table of Contents

Advertisement

7
Enter a key sequence up to eight key operations long.
You can use any of the following keys as part of your password key sequence.
[INPUT], [AUTO], [BLANK], [FREEZE], [COLOR MODE], [D-ZOOM +],
[D-ZOOM –], [KEYSTONE +], [KEYSTONE –], [MENU], [POINTER],
[ ], [ ], [ ]
, [FUNC]
8
After entering the new password, press the [ENTER] key.
This will display a dialog box prompting you to enter the same password again.
9
Re-enter the same password key sequence you entered in step 7 and then press
[ENTER].
The message "Your new password has been registered." indicates that the password has
been changed. Press the [ESC] key.
If the password you entered in this step is different from the one you entered in step 7,
the message "The password you input is wrong." appears. Press the [ESC] key to return
to step 7.
10
After you are finished, press the [MENU] key to exit the setup menu.
To turn password protection on and off
1
Display the Power On Password setting screen by performing steps 1 through 5
of the procedure under "To change the password" on page 14.
At this time, make sure that "Power On Password" is selected on the Power On
Password setting screen.
2
Use the [ ] and [ ] keys to select "On" or "Off".
Changing the power on password setting from "On" to "Off" causes the confirmation
dialog box shown below to appear.
Press the [ENTER] key to confirm that you want to turn on power on password
protection, or [ESC] to exit the dialog box without doing anything.
3
After you are finished, press the [MENU] key to exit the setup menu.

Entering the Password when Turning On the Projector

When you turn on the projector while password protection is turned on will cause a
password input dialog box to appear on the projection screen. All projector operations will
be accessible to you after you input the correct password and press the [ENTER] key.
Note
You can perform the projection size adjustment operation ([ZOOM +] / [ZOOM –] keys),
focus operation ([FOCUS
while the password input dialog box is on the projection screen.
] / [FOCUS
] keys), and power off operation ([
15
[
], [
], [ ]
[ ],
,
] key)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xj-s41Xj-s36Xj-s46Xj-s31/xj-s36Xj-s41/xj-s46

Table of Contents