Basic Setup Menu Example - Casio XJ-S31 User Manual

Basic Setup Menu Example

The procedure below shows how to configure the following three settings:
• Image Adjustment
• Image Adjustment
• Option Settings 1
Note
Certain settings on the setup menu cannot be changed while there is no input signal
to the projector. Because of this, you should configure setup menu settings after
selecting an input source and starting projection.
This example covers basic steps only. For more detailed information, see "Setup Menu
Contents" on page 17.
To configure the "Image Adjustment
1
Press the [MENU] key to display the setup menu.
2
"Image Adjustment" is initially selected on the main menu, so simply press the
[ENTER] key.
3
Press the [ ] key once to select "Contrast".
4
Use the [ ] (lighter) and [ ] (darker) keys to adjust contrast.
To configure the "Image Adjustment
5
Press the [ ] key once to select "Color Mode".
6
Press the [ENTER] key.
This displays the color mode menu.
7
Use the [ ] and [ ] keys to select the color mode you want.
8
After selecting the color mode you want, press the [ESC] key.
Contrast
Color Mode
Eco Mode
Contrast" setting
Color Mode" setting
12