Table of Contents
Advertisement
Quick Links
Hand Wash Drier.
Models CME_41 & 45
Product Manual.
CME_45
For technical advice, or further information on Wallgate products,
Contact our Customer Services Department,
Tel: (01722) 744594
Fax: (01722) 742096 Sales,
or 742933 Service.
Email: sales@wallgate.com, service@wallgate.com
Crow Lane, Wilton, Salisbury, Wiltshire, SP2 OHB.
www.wallgate.com
Advertisement
Table of Contents
Related Manuals for Wallgate CME 41
Summary of Contents for Wallgate CME 41
- Page 1 Hand Wash Drier. Models CME_41 & 45 Product Manual. CME_45 For technical advice, or further information on Wallgate products, Contact our Customer Services Department, Tel: (01722) 744594 Fax: (01722) 742096 Sales, or 742933 Service. Email: sales@wallgate.com, service@wallgate.com Crow Lane, Wilton, Salisbury, Wiltshire, SP2 OHB.
- Page 2 Wallgate Ltd using the contact details on the front page here. (d) Details on how to use, care for and service the hand wash unit are contained in the Operating &...
- Page 3 safe place. Cut away the plastic film around the unit and remove the four polystyrene support corners. Do not pick up the unit by the fascia panel edges but support it below the white cabinet. (d) Using a RESIST-TORX T30 security key undo the two screws on the unit top fascia panel and lift the panel off.
- Page 4 6. COMMISSIONING FOR USE. (a) Replace the drawer into its slides ensuring it engages properly on each side into the clips. (b) Place the soap container into the right hand side of the drawer & fill it with the soap provided.
- Page 6 Welcome to your handwash unit. The unit has been designed and manufactured from quality materials. If these user instructions are followed, the unit will give reliable efficient service. If you need further information, please contact Wallgate Ltd. The two models are follows: Push button operation, model CME_41.
- Page 7 The TCU100 is fitted to the CME_45 model, time cycles may be adjusted using the onboard ‘Control Interface module’. For further details contact Wallgate. After all adjustments are completed ensure that the internal cover plate is correctly replaced &...
- Page 8 Any service or repair work must be carried out by a qualified engineer, which during the warranty period must be a Wallgate engineer or appointed service agent. During the warranty period contact Wallgate for warranty work or advice.
Need help?
Do you have a question about the CME 41 and is the answer not in the manual?
Questions and answers