BEKA -MAX Original Operating And Assembly Manual page 6

Check the surfaces temperature of the central lubrication pump as a possible heat transfer bears the risk of
burns. Wear heat resistant protective gloves!
Naked light and fire are strictly forbidden during all maintenance, inspection and repair works due to fire
hazard.
3.6 Freelancing alteration and spare part production
Alteration, repair and changes of the device are only accepted after manufacturer feedback. Original spare
parts and authorized accessories from the manufacturer are for your
loss of any liabilities. BEKAdoes not assume liability for parts that are retrofit by the operator.
3.7 Improper methods of operation
The operational safety of the
manual. Never exceed the indicated values of the technical data.
3.8 Electrostatic discharge
Avoid electrostatic discharge! There are electronic components integrated into the devices which might be
destroyed by electrostatic discharge. Observe the safety precautions against electrostatic discharge
according to DIN EN 61340-5-1/-3. Ensure that the environment (persons, workplace and packing) is well
grounded when handling these devices.
3.9 General hazard note - residual risk
All components
regulations of the construction of technical systems in regards to operational safety and accident prevention.
Independently from this the use can lead to hazards for the user or third parties as well as for other technical
facilities. Therefore the device may only fulfill its intended use in a technically acceptable and faultless use.
This has to happen in adherence of the according safety regulations and attention of the operating manual.
Pay regularly attention of the device and its components and check possible damages or leakage. Liquids
could splatter out with high pressure from components that are pressurized and leak.
© BEKA 201 All rights reserved 5
...a product of BEKA
central lubrication pump GIGA / GIGA PLUS
of the central lubrication pump GIGA / GIGA PLUS
!
safety . The use other parts can result in
is only guaranteed as indicated in the operating
are designed according to valid
6