General Safety Instructions - BEKA -MAX Original Operating And Assembly Manual

3.

General safety instructions

All persons that are in charge with the assembly, start-up, mai tenance and operation of the central lubrication pump
GIGA / GIGA PLUS must carefully read these instructions. Furthermore this operating manual always has to be available
on site!
Basic notes for the setup, operation and maintenance can be found below!
3.1 Safety instructions:
Do not observe the safety instructions within th s point but also have a look at the special safety warnings that are
implemented in other areas of this d cumenta ion.
Symbols warns against voltage.
Safety instructions that cOffe person hazards in case of non-observance are marked with the general hazard
symbol.
Warnings against hot surfaces are marked with this symbol.
Warnings of suspen ing loads are marked with this symbol.
Warning of damage to property due to electrostatic discharge! Marks potential risks which may result in
material damage, if not avoided.
Attention!
This he ding is used if the improper or general non-observeance of the operating manual,
specified work flow and the like result in device damage.
Note!
This term is used to indicate specialities.
Absolutely observe indications that are directly installed at the central lubrication pump GIGA / GIGA PLUS and
keep them always readable!
2.2 Qualification and training of staff
The staff in charge for operation, maintenance, inspection and assembly has to have the according
qualification for these works. Competence, area of authority and staff monitoring must exactly be controlled
by operator. In case the staff does not have the necessary knowledge it has to be instructed and trained. The
operator is obliged that the staff fully understands the content of this user information.
© BEKA 201 All rights reserved 5
...a product of BEKA
i
o t
d
a
!
n
4