Can I Set The Time Manually; Why Is The Time Displayed Incorrectly Even Though The Thermostat Is Added To A Wlan Network; How Does The Built-In Pir Sensor Work; What Does The "Pump/Valve Kick" Function Mean - Siemens RDS110 User Manual

11.1.11 Can I set the time manually?

11.1.12 Why is the time displayed incorrectly even though the

11.1.13 How does the built-in PIR sensor work?

11.1.14 What does the "Pump/valve kick" function mean?

11.1.15 I've registered an account but cannot log in.

11.1.16 I've signed up but have not received a confirmation
11.1.17 Can I create more than one user account in the mobile
A6V10877569_en--_e
●
The thermostat connected to a WLAN network once and could display time
correctly.
●
The thermostat hasn't been powered off for more than three minutes.
Lacking either of the above conditions may result in incorrect time display.
No, you can't. The thermostat gets the time automatically after you've added the
thermostat to a WLAN network and set a correct time zone.
thermostat is added to a WLAN network?
Maybe it is because the synchronization with the server hasn't started yet, or
because the time zone is not selected correctly. Normally the server synchronizes
the time at a fixed time of each day.
See Presence detection using the built-in PIR sensor [➙ 18].
It means whether to run a constantly idle pump or valve periodically to protect it
from seizure. If one of the following equipment is selected as the heating system,
"Pump/valve kick" is available and you can decide whether to activate the function
or not.
●
Radiator with valve
●
Radiator with pump
●
Floor heating with valve
●
Floor heating with pump
For more information about equipment selection and activation of the "Pump/valve
kick" function, see Changing system setup [➙ 36]. For more information about the
interval of running the pump or valve forcibly, see Parameter 24 in Managing
application settings [➙ 28].
Check your email and ensure that you received an activation email. Follow the
instructions to activate your account and then log in to the mobile app.
email.
Check for the email in your Junk or Deleted folder. If there is no email in the Junk
or Deleted folder, request the confirmation email again.
app?
Yes, you can, but you cannot log into different accounts at the same time. Besides,
it is normally unnecessary to do so if you want to manage more than one
thermostat using the app, because one user account can associate with a
maximum of 12 thermostats. However, one thermostat can only be associated with
one user account. If your family members or colleagues want to manage the
thermostats, you can share the account info with them.
Appendices
Frequently asked questions
11
55 | 59