Siemens RDS110 User Manual page 24

6
Operating the thermostat on the device
WLAN connection
24 | 59
– Tap > , and then wait for the thermostat to discover the networks
nearby.
3. Tap your desired network. If necessary, tap
networks to select one.
4. For secured networks, enter the relevant password, and then tap "Connect".
Note: For more information about the administrator password, see Creating an
administrator password [➙ 25].
Manually add a network
1. If the thermostat is selected for commercial use:
– On the "Advanced Settings" page, tap
down to find and tap "Add Network".
2. If the thermostat is selected for home use:
– On the "Settings" page, tap
and tap "Add Network".
3. Enter the Network name (SSID) information.
4. To select a security type, tap the "Security" field.
5. Tap "Connect".
6. If prompted, enter the relevant password, and then tap "Connect".
Configure your current network settings
1. If the thermostat is selected for commercial use:
– On the "Advanced Settings" page, tap
displays on the screen.
2. If the thermostat is selected for home use:
– On the "Settings" page, tap
screen.
3. Tap "Network Settings". The default DHCP (Dynamic host configuration
protocol) setting page displays on the screen.
– If necessary, tap
settings like "Preferred DNS".
– If you want to customize the current network settings, tap "Manual", select
a field, or tap
setting.
Connect to a network via push button
If you have little knowledge about wireless security, using the push button method
makes it easy for you to establish a secure wireless network connection. If you
want to use this method, you must have a WPS (Wi-Fi Protected Setup) compatible
router.
Connect to a network using the push button
1. If the thermostat is selected for commercial use:
– On the "Advanced Settings" page, tap
"Push Button Setup".
2. If the thermostat is selected for home use:
– On the "Settings" page, tap
Setup".
> , and then tap
> . Your current network displays on the
or to scroll through and view other network DHCP
or to scroll to the desired field, and then enter a new
> , then tap
or to scroll through the
> , and then tap to scroll
to scroll down to find
> . Your current network
> , then tap until you see
until you see "Push Button
A6V10877569_en--_e