Safety Instructions - ALTA Bliss Automation Programming And Users Manual
15 channel remote control
Hide thumbs
Also See for Bliss Automation:
- Installation and reference manual (9 pages) ,
- Programming and users manual (2 pages)
Table of Contents
Advertisement
Safety Instructions
Attention
Never drop, knock, drill or submerge the motor. Keep the power cable in the proper position as shown below.
Read all safety instructions before installation.
Incorrect installation can lead to serious injury and will void manufacturer's liability and warranty.
×
Important Safety Instructions
1. Do not expose motor to humid, damp, or extreme temperature conditions.
2. Do not drill into motor.
3. Do not cut the antenna. Keep it clear from metal objects.
Declarations
AMP25B
4. Do not allow children to play with this device.
Instruction
5. If the power cable or connector is damaged, do not use.
Features
6. Ensure the power cable and aerial is clear and protected from moving parts.
Fields of Application
7. Cable routed through walls should be properly isolated.
FCC Text - text 01
Roller
Specifications
8. Motor is to be mounted in horizontal position only.
Working temperature: -10℃ ~ +50℃
Input Voltage: USB 5V 1A / USB 5V 2A
The motor is suitable for motorization of roller blinds, sheer shadings, roman shades, and zebra shades.
Following data for reference
9. Before installation, remove unnecessary cords and disable equipment not needed for powered operation.
AMP25B - 0.7/34
10. Installation and programming should be performed by a qualified professional. Use or modification outside the scope of these instructions
AMP25B -1.1/28
Attention
Never drop, knock, drill or submerge the motor. Keep the power cable in right position as following.
may void warranty.
Important safety instructions to be read before installation.
Incorrect installation can lead to serious injury and will void manufacturer's liability and warranty.
Safety
1. Do not expose motor to humid, damp or extreme temperature conditions.
2. Do not drill into motor.
3. Do not cut the antenna and keep it clear from metal objects.
4. Do not allow children to play with this device.
Do not dispose of in general waste.
5. If power cable or connector is damaged, do not use.
6. Ensure correct crown and drive adaptor are used.
7. Ensure power cable and aerial is clear and protected from moving parts.
8. Cable routed through walls shall be properly isolated.
9. Motor is to be mounted in horizontal position only.
Please recycle batteries and damaged electrical products appropriately.
10. Before installation, remove unnecessary cords and disable equipment not needed for powered
Do not dispose of in general waste.
operation.
Please recycle batteries and damaged electrical products appropriately.
11. Installation and programming to be performed by a qualified professional, use or modification outside
the scope of this instruction may void warranty.
3
B L I S S R E M O T E C O N T R O L
×
Charging Instructions
Micro-USB Port
LED light
P1 button
Lithium Battery Switch
This motor has a built in Li-ion battery pack with integrated charge management.
Max power input for recharging: 5V 2A.
Before first use please charge motor for 6 hours. Using 5V charger (most phones charger is 5V ) .
During operation, when the motor starts, the buzzer will beep 10 times, indicating a low-voltage alarm and
needs to be charged.
During operation, the voltage was detected to be too low, the battery was about to run out, the battery stopped
running and needed to be recharged.
Rechargeable Battery
Sheer
Revolve
Roman shades
Blinking red:
Low battery alert
Charging is processing
Radio Frequency: 433.925MHz
Maximum Running Time: 6 minutes
P1 Button Instructions
Rated Torque
Rated Speed
Rated Power
Model
(N.m)
(rpm)
(W)
0.7
34
8
1.1
28
8
Add visual explanation of P1 - file 02
-1-
|
R E F E R E N C E G U I D E
×
Add A zoom in on the
charging port
Blinking green:
Solid green:
Battery has
finished charging.
-2-
×
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Bliss Automation and is the answer not in the manual?
Questions and answers
BLINDS NOT CHARGING
ALTA Bliss Automation blinds may not be charging due to the following reasons:
1. Low Battery Alert – If the battery has run out, it needs to be recharged.
2. Charging Issues – Ensure the battery is connected to the correct USB power source (USB 5V 1A or USB 5V 2A).
3. Blinking Indicators – A blinking red light indicates a low battery, while a blinking green light shows charging is in progress. A solid green light means charging is complete.
4. Environmental Factors – The motor should not be exposed to moisture or extreme temperatures (-10℃ to +50℃).
5. Hardware Issues – If power cables are damaged or incorrectly connected, charging may not work.
Checking these factors can help diagnose and resolve charging issues.
This answer is automatically generated
Reset to factory, did pairing step. Unit is charged. When I press up or down it jogs but does not keep moving. I have been working on this for hours and hours.
If the ALTA Bliss Automation unit jogs but does not keep moving after a factory reset, follow these troubleshooting steps:
1. Check Battery and Power:
- Ensure the battery is not dead or inserted incorrectly (check polarity).
- If using a solar panel, recharge with the provided charger and check panel positioning.
- Verify that the motor is properly connected to power.
2. Check for Radio Interference:
- Keep the remote control and motor antenna away from metal objects.
- Move the remote closer to the receiver.
3. Check Remote Pairing:
- After a factory reset, the motor must be re-paired with the remote.
- Press the P1 button on the motor for about 2 seconds until the motor jogs once and beeps once.
- Within 10 seconds, press and hold the “Stop” button on the remote until the motor jogs twice and beeps three times.
4. Sleep Mode or Multiple Motors:
- Ensure other motors are in sleep mode to avoid interference.
- Make sure only one motor is paired to the remote channel being used.
5. Check Wiring:
- Confirm wiring is connected correctly if applicable.
If the motor jogs but does not continue operation, it is likely not fully paired with the remote or affected by one of the above issues. Re-pairing and checking power and signal conditions should resolve the issue.
This answer is automatically generated
Shade will not move either direction - new remote battery and unit charged fully
The ALTA Bliss Automation shade may not move in either direction despite a new remote battery and a fully charged unit because the motor direction cannot be changed if the upper and lower limits are already set. In this case, direction change can only be done using the P1 button. If the motor is set to move in a direction that is blocked by the preset limits, it will not respond to remote commands.
This answer is automatically generated
We moved into place with 2 shades that are synced with remote. They worked fine- today only 1 responds.