Sling Legrest; Sling Backrest - Neatech JOB User And Maintenance Manual

5.5.3. Sling legrest

Remove the legrest ad described in section 3.1 and remove the sling legrest.
Insert the new sling legrest in the same position, insert the legrest in one of the
three available positions and insert again the two fasteners in the appropriate holes.
Code
R105-003

5.5.4. Sling backrest

To replace the sling backrest release the strip on the rear part of the backrest and
remove it by passing it around the axis of the wheels.
After that remove the rope, and then remove the ties that keeps it attached to the
tubes.
As described enter the new sling backrest in the opposite direction.
Code
R105-004
Sling legrest
Sling backrest
www.neatech.it
64
Description
Description