Subscribe to Our Youtube Channel
Related Manuals for Phoenix Mecano LD75E+P
Summary of Contents for Phoenix Mecano LD75E+P
- Page 1 Assembly Instruction Linear actuator LD75E+P .….…………..2 B.017 663 Version 1.2...
-
Page 2: Table Of Contents
Contents Installation Declaration ....................4 Installation Declaration LD75E+P ..................4 General information ......................5 Notes on these assembly instructions ................5 Liability / warranty ......................6 Liability ..........................6 Product monitoring ......................6 Language of the operating instructions ................6 Copyright .......................... - Page 3 Phoenix Mecano Komponenten AG Transport and storage ..................... 21 Important information on installation and commissioning ..........21 Assembly ........................22 7.4.1 Installation procedure...................... 23 Maintenance ........................24 Cleaning ......................... 24 Disposal and return ......................24...
-
Page 4: Installation Declaration
Essential performance – Collateral standard: Electromagnetic disturbances – Requirements and test (IEC 60601-1-2:2014); German version EN 60601-1-2:2015 Phoenix Mecano Komponenten AG undertakes to submit technical documentation for the incomplete machine upon substantiated request of the national competent bodies in electronic format. -
Page 5: General Information
Phoenix Mecano Komponenten AG General information Notes on these assembly instructions These assembly instructions are only applicable for the electric cylinder described and intended as documentation for the manufacturer of the final product, into which this incomplete machine will be installed. -
Page 6: Liability / Warranty
Phoenix Mecano Komponenten AG. Users themselves are responsible for compliance with legal regulations and can be held liable in the event of misuse. The copyright owner of these assembly instructions is Phoenix Mecano... -
Page 7: Use / Operating Personnel
Moving persons with this electric cylinder, for example, is an example of an unintended use and is forbidden. Phoenix Mecano Kompo- nenten AG is released of liability and general operating licence of this electric cylinder becomes void in case of unintended use. -
Page 8: Safety
Safety instructions Phoenix Mecano Komponenten AG has constructed this electric cylinder according to the current state of the art and existing safety regulations. However, if the electric cylinder is misused and/or operated in the manner inconsistent with the intended use or if the safety instructions are not observed, this may result in hazards to personnel and property. -
Page 9: Safety Signs
Phoenix Mecano Komponenten AG Safety signs These warning and mandatory actions signs are the safety symbols which warn of risk or hazard. Data of these assembly instructions regarding special hazards or situations with electric cylinder must be complied with, while non-ob- servance increases the risk of an accident. -
Page 10: Product Information
6.1.1 Variants of power supply Power supply 12 / 24 VDC 6.1.2 Variants of force / speed The following basic executions in terms of force / travel speed of the electric cylinder LD75E+P are available: E+P variant Executions Voltage Push Pull Max. -
Page 11: Dimensions Of Geometry
Phoenix Mecano Komponenten AG Dimensions of geometry... -
Page 12: Variants Of Suspension
Variants of suspension Option 1 (0°) Option 2 (90°) (The rear view of the drive is shown in the top picture and the front view in the bottom picture) -
Page 13: Technical Data
Phoenix Mecano Komponenten AG Technical data Stroke length Up to 135 mm Dimension A (installation dimension) 245 ± 1.5 mm Special stroke lengths / installation lengths Customisation possible on request Mounting position any desired, without cross forces Lifting force Up to 750 N pull / push (depending on gear ratio and spindle pitch) 11 –... -
Page 14: Overview Diagram Of The Electric Cylinder
Mounting adapter, front Connection cable with plug / connection diagrams A connection cable with a compatible plug is supplied as standard for electric cylinders of the LD75E+P series. Please note that the specified protection class IP69k (static), resp. IP65 (dynamic) for the electric cylinder LD75E+P is only provided with a correctly mounted connection cable with plug! In order to guarantee a high IP protection class, we recommend that the free cable end is laid and connected in such a way that it is inside a protected area (e.g. -
Page 15: Assembly /Disassembly Of The Connection Cable With Plug
Phoenix Mecano Komponenten AG 6.6.1 Assembly /disassembly of the connection cable with plug ... -
Page 16: Connection Diagram For Variant 1 (Ap.4.017 661)
The basic execution of the LD75E+P series electric cylinders is available in two different variants: • Variant 1: Supply voltage polarity (Switch-off at limit in retracted / extended position) • Variant 2: Supply voltage polarity + potentiometer (Switch-off at limit in retracted / extended position + potentiometer (connections brought out as a position feedback) 6.6.2... -
Page 17: Connection Diagram For Variant 2 (Ap.4.017 662)
Phoenix Mecano Komponenten AG Brown The cylinder extends or retracts according to the polarity of the power supply. (BN) Blue Brown Retraction Minus Plus Extension Plus Minus Do not connect (RD) This line must not be connected. Black (BK) Violet... - Page 18 Brown The cylinder extends or retracts according to the polarity of the power supply. (BN) Blue Brown Retraction Minus Plus Extension Plus Minus Mechanical potentiometer (RD) The potentiometer generates an analogue position signal. Depending on the execution, you can re- solve a stroke of 100 or 130mm.
-
Page 19: Performance Charts
Phoenix Mecano Komponenten AG Performance charts Execution2 Execution1 Execution3 Execution4... - Page 20 Execution6 Execution5 Execution7 Execution8 All values in the performance charts are typical values measured under optimal conditions (stabilised power source and room temperature). These values may vary due to components which are subject to tolerances such as the leading spindle, guide nut and gear wheels as well as tribological influences.
-
Page 21: Life Phases
Transport and storage The product is to be checked by suitable personnel for visible and functional damage. Damage caused by transport and storage must be reported to the responsible person and Phoenix Mecano Komponenten AG immediately. Commissioning damaged electric cylinders is forbidden. -
Page 22: Assembly
The installation of the LD75E+P consists in fixing the electric cylinder using the rear and front suspensions. The cross bores of both suspensions measure 10.1 0/+0.1 mm according to the standard. The fastening bolts are not included in the scope of delivery. -
Page 23: Installation Procedure
Phoenix Mecano Komponenten AG 7.4.1 Installation procedure Hang the rear suspension onto the counterpart piece. Attention: The counterpart piece may not be able to rotate. The electric cylinder must be able to be rotated in the direction of the arrow (see figure). -
Page 24: Maintenance
Maintenance The electric cylinder is basically maintenance-free, but is not wear-free. Faulty functioning, excessive play of the movable parts or unusual sounds generated by the electric cylinder can be the signs of wear. Worn parts of the product must only be replaced by the manufacturer. The electric cylinder must be sent to the manufacturer for these works.
Need help?
Do you have a question about the LD75E+P and is the answer not in the manual?
Questions and answers