Advertisement
can become a projectile due to the coil speed and, if inadequate safety clothing is worn, injuries can
result.
Replacing the cutting string
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Hold the mower head removed from the machine
with one hand and loosen the cap with the other
hand by pressing the button (1) on the side of the
mower head and turning the cap clockwise.
Remove the coil.
Remove the remnants of the old string and insert
a new nylon string, which should not be longer
than 2.5 m. Completely unwind the new string be-
fore placing it in the centre of the coil. Make sure
that both ends of the string have the same length.
Attach the string to the slot provided and press it
down.
Roll both ends of the string tightly and neatly onto
the coil, making sure that one end of each is in a
compartment on the coil. Secure the ends in the
brackets provided, making sure the ends are long
enough to thread into the eyelets on the case.
The coil divider should still be visible even with
the string fully rolled up.
Item 61494
Page 19
03
2021-1
Advertisement
