Advertisement
Assembling the brush cutter
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
3. Loop the chain around the bar and insert it into the machine.
4. When assembling, pay attention to the running direction of the
chain.
5. Replace the cover and secure it using the blade nut (1). Then
adjust the tension of the chain accordingly.
Delivered parts/accessories
Fig. 6-point 2
Fig. 6-point 4
2. Fasten the guard using the 4 screws and nuts. Use the included
S5 hexagon wrench (5) and the open-end wrench.
Item 61494
Assembly
1. Dispose all accessories first
(pole,
guard,
metal
4 screws and nuts).
blade,
Page 12
03
2021-1
Advertisement
