Assembling the grass trimmer
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
3. Insert the supplied Allen key (5) into the hole (1) and loosen the
nut with the socket wrench (6) by turning it clockwise.
4. Remove the flange (2), cover (3) and nut (4).
5. Attach the blade to the drive shaft. Then fasten the flange, cover
and nut with the socket wrench (6) and turn it counter-clockwise.
Remove the Allen key again.
Delivered parts/accessories
Fig. 6-point 2
Fig. 6-point 3
2. Fasten the guard using the 4 screws and nuts. Use the S5
hexagon wrench (5) and the open-end wrench included in the
scope of delivery.
Item 61494
Assembly
1. Dispose all accessories (pole,
guard, string coil, 4 screws and
nuts).
Page 13
03
2021-1