Advertisement
Operating instructions
Lubricating the pole pruner
Tensioning the chain
Always pay attention to the tension of the chain of the pruner, as an insufficiently tensioned chain in-
creases the play between bar and chain. This unintended free space, together with a high speed, can
cause the chain to jump off the rail, becoming a projectile, which can lead to damage to the device and
its surroundings as well as very serious injuries. In addition, an insufficiently tensioned chain wears out
faster.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
1. Now operate the throttle lock and then the
throttle.
2. Activate the start lever lock and hold the
throttle in the active position.
Now place the device on the floor, make sure that
it stands securely and place one hand between
the handle and the motor to be able to hold the
device. Make sure that no people or body parts
are close to the cutting tool and pull the starter
rope.
1. Carefully remove the oil tank cap from the pru-
ner (1).
2. Fill the tank with lubricating oil.
Caution:
Do not use old or contaminated oil.
Fasten the oil tank cap (1) making sure that no oil
can leak out.
4. Remove oil droplets and other residues from
the housing.
5. Empty the oil container (2) after each use to
ensure the long service life of the device.
Item 61494
Page 17
03
2021-1
Advertisement
