Troubleshooting - Electrolux ESF5206LOW User Manual

40 www.electrolux.com

11. TROUBLESHOOTING

WARNING!
Improper repair of the
appliance may pose a
danger to the safety of the
user. Any repairs must be
performed by qualified
personnel.
The majority of problems that can
occur can be solved without the need
Problem and alarm code
You cannot activate the appliance.
The programme does not start.
The appliance does not fill with wa‐
ter.
• The indicator
intermittently.
• The light related to the start but‐
ton flashes continuously.
The appliance does not drain the
water.
• The indicator
times intermittently.
• The light related to the start but‐
ton flashes continuously.
The anti-flood device is on.
• The indicator
times intermittently.
• The light related to the start but‐
ton flashes continuously.
Possible cause and solution
• Make sure that the mains plug is connected
to the mains socket.
• Make sure that there is no damaged fuse in
the fuse box.
• Make sure that the appliance door is closed.
• Press the start button.
• If the delay start is set, cancel the setting or
wait for the end of the countdown.
• The appliance recharges the resin inside
the water softener. The duration of the pro‐
cedure is approximately 5 minutes.
• Make sure that the water tap is open.
• Make sure that the pressure of the water
supply is not too low. For this information,
flashes 1 time
contact your local water authority.
• Make sure that the water tap is not clogged.
• Make sure that the filter in the inlet hose is
not clogged.
• Make sure that the inlet hose has no kinks
or bends.
• Make sure that the sink spigot is not clog‐
ged.
• Make sure that the interior filter system is
flashes 2
not clogged.
• Make sure that the drain hose has no kinks
or bends.
• Close the water tap.
• Make sure that the appliance is correctly in‐
flashes 3
stalled.
• Make sure the baskets are loaded as in‐
structed in the user manual.
to contact an Authorised Service
Centre.
Refer to the below table for information
on possible problems.
With some problems, the dedicated
indicator flashes intermittently to indicate
a malfunction and the alarm code.