Power Off - Konica Minolta REGIUS 190 Operation Manual

Direct digitizer
Hide thumbs Also See for REGIUS 190:
Table of Contents

Advertisement

Power OFF

The process for switching off the power is detailed below.
LCD Panel
"operation" Button
"operation" Lamp
POWER OFF AFT 5
POWER OFF IN PROCESS
Definition of REGIUS MODEL 190 status
1. SLEEP
- Termination of daily operation.
2. operation OFF
- Turning off the power breaker
- Suspended use of the device for an extended period
3. Power Breaker OFF
- Suspended use of the device for an extended period.
- Unplugging of the power cable from outlet.
- For service purpose (maintenance service, etc.)
- Emergency stop of operation at the time of accident such as smoke/fire
generation or being caught in the device.
* Except for the case of Emergency Stop, "Power Breaker OFF" should be
implemented only after terminating the operation by pressing the [operation]
button. Otherwise, it may lead to damage to the device, generating risk that the
device may not start up in the normal way.
1
Ensure that the REGIUS MODEL 190 is in
Sleep Mode or the message "READY"
appears on the LCD panel. Then depress
the "operation" button.
(Approx. for five seconds)
• "POWER OFF AFT 5" appears on the LCD
panel, then the counter starts counting
down from five to one. (Approx. for five
seconds)
• If the operation switch is released before
the counter reaches one, the counter stops
counting down, and resumes "READY" on
the LCD panel again.
2
The message "POWER OFF IN
PROCESS" together with a counter
"■ ■ ■ • • • " will appear on the LCD
panel. (For approx. 20 seconds.)
• The counter "■ ■ ■ • • • " starts to
decrement. (For approx. 10 seconds.)
• The "operation" lamp will flash.
3
The LCD panel extinguishes.
• After the LCD panel extinguishes, the
"operation" lamp keeps flashing for approx.
10 seconds, then extinguishes.
4
Power off the power breaker of REGIUS
MODEL 190.
REGIUS MODEL 190 OPERATION MANUAL Ver.1.03 2004.12
41
It is not usually necessary to
switch OFF the power breaker
when shut downing the unit.
The power breaker should be
switched OFF only when the
unit is not to be used for an
extended period.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

0676

Table of Contents