METHVEN 01-2732 Installation Manual

Minimalist wall mounted bath set

Download this manual

Ceramic Cartridge Adjustment

Do not remove the ceramic cartridge from the body assembly while carrying

out the following adjustments. Note, the cartridge is factory set for maximum

temperature

Flow limiting adjustment

Remove half-dome

(if attached)

1.5mm Allen Key

Mix temperature limiting

SEPT 2011

Methven Australia Pty Ltd

ABN 15 104 813 390

Melbourne, Australia

www.methven.com

adjustment

MA012732

Minimalist Wall Mounted

Bath Set

Installation Guide

IMPORTANT

Please read all of the instructions before installation

Use of this product in non-domestic applications voids warranty.

All pipe work must be thoroughly ﬂushed prior to the installation of the mixer.

NEFA inline ﬁlters must be installed on both hot and cold supplies.

Do not remove the ceramic cartridge from the mixer when installing.

Damage caused by hydrostatic testing is not covered by our warranty.

www.methven.com

01-2732

SPEC001

WMKA 21005

Need help?

Do you have a question about the 01-2732 and is the answer not in the manual?

Page 1 Do not remove the ceramic cartridge from the mixer when installing. SPEC001 Damage caused by hydrostatic testing is not covered by our warranty. WMKA 21005 SEPT 2011 MA012732 Methven Australia Pty Ltd ABN 15 104 813 390 www.methven.com Melbourne, Australia www.methven.com...
Page 2 2. Fit faceplate to wall 3. Fit outlet to nipple THE METHVEN GUARANTEE The warranty statement shall apply to all tapware & showers supplied by Methven We recommend that this product is installed by a licensed plumber. For more information visit www.methven.com...