Bosch UniversalGrassCut 18V-26 Original Instructions Manual page 26

26 | English
Charger
– Battery with 2.5 Ah
– Battery with 4.0 Ah
– Battery with 6.0 Ah
Weight according to EPTA‑Pro-
cedure 01:2014
Protection class
Noise/Vibration Information
Noise emission values determined according to EN 50636-2-91.
Typically the A-weighted noise levels of the product are:
– Sound pressure level
– Sound power level
– Uncertainty K
– Vibration emission value a
h
– Uncertainty K
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
Mounting and Operation
Action
Product Features
Delivery scope
Mounting the protection guard
Adjusting the working height
Folding out the handle
Mounting the wheel
Battery charging and inserting
F 016 L94 189 | (05.08.2021)
AL 1810 CV
min 154
min 244
min 364
kg 0.17
/ II
dB(A)
dB(A)
dB
2
m/s
2
m/s
Action
Switching On and Off
Recommended position for grass
cutting
Recommended position for edge
trimming
Recommended position for cutting
under bushes
Removing the line spool
Winding line on spool
Mounting the line spool
Maintenance, Cleaning and Stor-
age
Accessories
Assembly
Caution: Switch the garden tool off and remove the
u
battery before performing any maintenance.
Mounting the protection guard (see figure C)
Figure Page
Slide the protection guard (5) onto the trimmer head until a
A 459
click can be heard. Affix the protection guard (5) to the trim-
B 460
mer with the screw. The screw is already fitted to the bottom
housing upon delivery.
C 460
Never use the trimmer without the protection guard (5)
D 461
mounted. After mounting, the protection guard (5) may not
E 462
be removed from the trimmer.
F 462
G 463
AL 1820 CV AL 1830 CV
95 60
125 95
150 130
0.48 0.40
/ II / II
Lawn trimming
77
87
= 3
7
= 1.5
Figure
AL 1880 CV
36
35
62
0.60
/ II
Edge cutting
76.5
89
= 3
7
= 1.5
Page
H 463
I 464
J 465
K 466
L 467
M 468
N 469
O 469
470
P
Bosch Power Tools